Wealden add more routing accessory products to range

Wealden Tools have added several new items to their range of routing accessories.

Now in stock is a router centring cone, or alignment cone, which is very useful for aligning guide bushes and for checking the concentricity of a router base with the motor spindle.  The cone is available to buy on line from Wealden.

Also now in stock is Trend's N-Compass Circle Jig, which will rout circles from 25mm to 200mm diameter, with optional extension rods which allow an increase of 560mm. It features a quick-fit quick-release system with an alternative pin position, depending on desired circle size.  For further information or to buy online, click here. 

Another addition to the stock range is a self-centering base router mortise base that allows a quick and easy mortise to be routed centrally on the component. Roller guides follow workpiece edges with the mortise width set by the cutter diameter. For further information or to buy online, click here. 


Wealden's full range of router cutters, spindle moulder tooling, drills and sawblades is available to buy on line at http://www.wealdentool.com/.

Makita collets added to Wealden's stock range

Collets to fit a variety of Makita routing machines have just been added to Wealden Tools' online range.

Already in stock are collets in a range of shank sizes (1/4", 8mm, 3/8" and 1/2") for use in a variety of common routing machines including CMT, Black and Decker, Bosch, DeWalt, Elu, Festo, Freud and Trend.

A selection guide is available on the website to ensure the correct collet is selected for a particular router.  Click here to buy collets online.

Wealden's full range of router cutters, spindle moulder tooling, drills and sawblades is available to buy on line at http://www.wealdentool.com/.

Special Offer on Wealden's Raise-A-Panel Cutters

A common requirement is the production of mock panelling on solid timber or MDF panels for furniture manufacture, an operation usually carried out using a template with a top bearing-guided Classic Ogee cutter. Although effective, this does not resemble a true raised panel.

Wealden's unique system uses two cutters which, with two passes using the same template, will produce an effect that more closely echoes a traditional raised panel.  Designed by and unique to Wealden, two sizes are available, producing either a 30mm or 40mm wide moulding with a moulded groove of 10-12mm.

Until the end of February 2010 the cutters are available at a special 15% discount. Click here to go the website for full details.

Wealden's full range of router cutters, spindle moulder tooling, drills and sawblades is available to buy on line at http://www.wealdentool.com/.

Wealden Tools publishes latest Spindle Moulder Tooling Catalogue

Wealden Tools have just published their latest catalogue of spindle moulder tooling - sixty pages packed with spindle moulding cutterheads, knives, limitors and other blocks together with a range of accessories such as reducer bushes, spacer rings, storage boxes etc.

The catalogue is available in digital page-turning format. or as a pdf download.

All products are available to buy on line from Wealden.

Wealden's full range of router cutters, spindle moulder tooling, drills and sawblades is available to buy on line at http://www.wealdentool.com/.

Wealden's Tenon Cutter converts router tables into mini spindle moulder

The "New Tools" section in the latest issue of British Woodworking magazine features an article about Wealden's Tenon Cutter. 

This is a great value router cutter which allows a tenon to be cut in one pass - an operation difficult with standard cutters.  Essentially, the Tenon cutter converts a router table into a miniature spindle moulder, the blades of the cutter being alternately skewed to cut the shoulders of the tenon with a shearing action for a better finish.

Click here to download a pdf of the article

These cutters are available to buy on line from Wealden.

Wealden's full range of router cutters, spindle moulder tooling, drills and sawblades is available to buy on line at http://www.wealdentool.com/.

Flat Bits and Slotted Countersinks added to Wealden's range of accessories

Wealden have added a comprehensive range of flat bits and several sizes of slotted countersink cutters to their already extensive range.

The flat or spade bits are available in diameter sizes from 6mm to 38mm and produce a precise cut with spot precision drilling for soft and hard timbers.

The slotted deburring countersink cutters are lateral hole drilling and produce a countersink angle of 90 degrees.

All are available to buy on line.  Click here to buy Flat Bits and here for Slotted Countersinks.

Wealden's full range of router cutters, spindle moulder tooling, drills and sawblades is available to buy on line at http://www.wealdentool.com/.

Trend Modular Window System proves popular

The new Trend Modular Window System is the latest innovation in timber window construction, which allows timber windows to be made quickly and accurately on a spindle moulder with minimal set-up time.

Eight different styles of window can be made on various makes of spindle moulders with a sliding table. It is simple, quick and easy to set up for any person with limited machinery experience. Ideal for small to medium sized joinery companies, it has a low investment cost and produces any quantity of windows, even one-offs, without lengthy set-up time and costly test cuts.

Many of the tools are shared across all window styles, so other styles can be added with minimal extra cost.

For further details, visit the website New Additions page.

A full 52 page brochure is available by pdf download, but this is 18.5MB in size and takes several minutes to download.  Alternatively, prices are available on request from Wealden Tool Co. Ltd. (01892) 835100 or by email sales@wealdentool.com. 
Wealden's full range of router cutters, spindle moulder tooling, drills and sawblades is available to buy on line at http://www.wealdentool.com/.